PEDAL POWER 2 PLUS AND POWER STRIP

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
dmerv
Posts: 10
Joined: Thu Nov 05, 2009 5:21 pm

PEDAL POWER 2 PLUS AND POWER STRIP

Post by dmerv » Thu Nov 19, 2009 6:57 pm

Hello,

Can I use a power strip with the AC out (on the PP2+) to power my EH Mistress, BK Tube Driver, and TC Elec Chorus?

All use the Two prong outlet



Thanks

Dan

Trueman
Posts: 117
Joined: Fri May 15, 2009 3:08 am
Location: New Zealand!
Contact:

Re: PEDAL POWER 2 PLUS AND POWER STRIP

Post by Trueman » Tue Nov 24, 2009 5:36 pm

Yes cant see any problems there.
Connoisseur of good tone.

http://www.john-trueman.com : Guitarist from Down Under
http://www.guitarpedals.co.nz

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PEDAL POWER 2 PLUS AND POWER STRIP

Post by JohnClark » Wed Nov 25, 2009 12:48 pm

What he said. Should be no problem.



There is a 200 Watt maximum when using the Courtesy Outlet. Simply add up the maximum power consumption of each device you wish to power... this is usually labeled on the power supply somewhere... as long as that sum is less than 200 Watts then there is no problem. By the way, the 200 Watt maximum is quite high and will likely not be of any concern when powering multiple wall warts.

also...

http://www.voodoolab.com/forum/viewtopic.php?f=7&t=781

dmerv
Posts: 10
Joined: Thu Nov 05, 2009 5:21 pm

Re: PEDAL POWER 2 PLUS AND POWER STRIP

Post by dmerv » Thu Nov 26, 2009 8:36 pm

Thank you for the info - It helps a alot!

I apologize for the duplicate post. :oops:

Post Reply