It is currently Fri Nov 24, 2017 4:18 am

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Boomerang+ with PP2+?
PostPosted: Tue Nov 17, 2009 8:48 pm 
Offline

Joined: Tue Nov 17, 2009 8:07 pm
Posts: 19
Hello,
Can a Boomerang+ be powered from outputs 5 or 6 on the PP2+? I expect the official answer to be "no", but I'm asking b/c others on here seem to be powering their Eventide Timefactors, which requires 1200mA, with no problem.
The specs on the Boomerang are: 9-10v AC (only), 700 mA. The red barrel connector fits. If I were to try it, which position for the DIP switch? I want to be sure I don't fry the 'rang.
I would love to take the wall wart off my board.
Thanks in advance!

Skippertronic


Top
 Profile  
 
 Post subject: Re: Boomerang+ with PP2+?
PostPosted: Wed Nov 18, 2009 8:49 pm 
Offline

Joined: Tue Nov 17, 2009 8:07 pm
Posts: 19
Anybody out there? I apologize if this is a dumb question, I'm a newbie and I could really use an answer. Thanks! :?:


Top
 Profile  
 
 Post subject: Re: Boomerang+ with PP2+?
PostPosted: Thu Nov 19, 2009 10:41 am 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6760
Location: The Lab
The Boomerang is AC only so it can only be powered from a Pedal Power AC or from one of the AC outputs on the upcoming Pedal Power Versa. With the Pedal Power 2+ you would have to use the supplied adapter connected to the Courtesy Outlet. The reason we are able to power the Eventide pedals directly is because they are DC and don't draw anywhere near the stated 1200mA requirement. I hope that helps!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: