NPN & PNP pedals

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Posts: 231
Joined: Fri Jun 11, 2010 12:13 pm
Location: Darkest Suffolk UK

NPN & PNP pedals

Post by bettsaj » Wed May 03, 2017 7:58 am

Simple question with hopefully an easy answer.....

I'm going to be using a few pedals in my system (rack based with a GCX) I intend to be using pedals that are negative ground, however i'll probably be using a positive ground germanium fuzz face..... Will this all work on a Voodoo Lab pedal power system as i'm obviously aware of mixing PNP and NPN together on the same power supply isn't possible normally.
"My technique is laughable at times. I have developed a style of my own, I suppose, which creeps around. I'll never be a very fast guitar player."

David Gilmour

Posts: 7236
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: NPN & PNP pedals

Post by JohnClark » Wed May 03, 2017 10:49 am

This is one of the main features of the isolated outputs of a Pedal Power... each output section is effectively an independent power supply. So yes, you can mix positive and negative grounded pedals on a Pedal Power with no fear of anything shorting out.

Good Luck!

Post Reply