Voodoo Lab

connecting 2 wireless units to pp2
Page 1 of 1

Author:  Ken R [ Tue Apr 25, 2017 5:29 pm ]
Post subject:  connecting 2 wireless units to pp2

Can I connect a Shure PGX4 wireless mic unit 12-18V 160mA and an Audio Technica ATW-R1100 wireless guitar unit DC 12V 500mA to the PP2 plus? If so, how do I do that. I'm assuming that I can use a doubler cable on ports 5 and 6 and change the dips for the Shure and just plug the AT into the AC outlet on the back? Could someone confirm that?

Author:  JohnClark [ Thu Apr 27, 2017 8:54 am ]
Post subject:  Re: connecting 2 wireless units to pp2

The Shure receiver can be powered from output 5 or 6 with the corresponding DIP switch set away from Normal, no doubler cable is needed for this one.

I have been searching for accurate information on the actual current draw for the Audio Technica receiver but so far have come up empty handed :oops:
For now, yes I would suggest running it with its included power adapter connected to the Courtesy Outlet on the back of the Pedal Power 2+.

I hope that helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group