Voodoo Lab
http://www.voodoolab.com/forum/

PP+2 with Boss RC300 and ME80
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=7514
Page 1 of 1

Author:  Off-World [ Sat Apr 15, 2017 4:11 am ]
Post subject:  PP+2 with Boss RC300 and ME80

Hi all, I'm wondering if it is possible to run both the Boss RC300 loopstation and the Boss ME80 multi effects plus a few other small 9v pedals off of a Pedal Power Plus 2 and iff so what would be the best way to go about it?
The RC300 currently uses the Uk PSA 230Es and Ive seen it recommended for the ME80 too.
Thanks for your help.

Author:  JohnClark [ Mon Apr 17, 2017 10:30 am ]
Post subject:  Re: PP+2 with Boss RC300 and ME80

You can power both, but the RC-300 will need a Current Doubler Adapter (the one with the Green end) connected to output 5 or 6 and any other output with both corresponding DIP switches set to Normal.

The ME-80 can be powered directly from output 5 or 6 with the corresponding DIP switch set to Normal.

I hope that helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/