Voodoo Lab
http://www.voodoolab.com/forum/

Powering a Shure PG4 wireless receiver + L6 M9
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=7438
Page 1 of 1

Author:  toutjiaris [ Thu Mar 23, 2017 4:38 pm ]
Post subject:  Powering a Shure PG4 wireless receiver + L6 M9

Hello,

What pedal power would be sufficient enough to power my Shure PG4 receiver? it states "12–18 Vdc 160 mA" on the back of the unit.

Also the same question applies to the Line 6 M9.

Thanks

(Edit) Here's the current shure adapter
http://imgur.com/a/UfP6G

Author:  JohnClark [ Thu Mar 23, 2017 5:03 pm ]
Post subject:  Re: Powering a Shure PG4 wireless receiver + L6 M9

A Pedal Power Digital would have no problem powering both of these. Will there be other pedals in this setup as well?

Author:  toutjiaris [ Thu Mar 23, 2017 5:23 pm ]
Post subject:  Re: Powering a Shure PG4 wireless receiver + L6 M9

Thanks john

Currently:

Tc polytune 2
2 x ISP Decimator II's
Ibanez TS9
Shure pg4 receiver

The M9 is potentially for the future plus maybe one or two othee stompboxes. So possibly need more outputs.

Author:  JohnClark [ Thu Mar 23, 2017 5:52 pm ]
Post subject:  Re: Powering a Shure PG4 wireless receiver + L6 M9

No problem!

A Pedal Power 4x4 would probably be a better fit in that case. It has all the same High Current capabilities that the Digital has, but adds four 100mA outputs that are good for "regular" pedals.

I hope that helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/