Power for Original Big Box EHX POG

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
guitar479
Posts: 3
Joined: Fri Nov 20, 2009 12:30 am

Power for Original Big Box EHX POG

Post by guitar479 » Tue Mar 14, 2017 5:50 pm

Planning to put the original big box Electro Harmonix POG on a session board; currently has a Voodoo Lab ISO 5 and Digital for power. The 18V power tap is being used.

What cable is needed to combine the two 400ma 9v outs on the Digital to make 18v for the POG?

Thanks.

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Power for Original Big Box EHX POG

Post by JohnClark » Wed Mar 15, 2017 12:20 pm

The original POG will need the 2.5mm Voltage Doubling Cable - 18V or 24V (PPEH24) in order to power it at 18V using two of the 9V Outputs on a Pedal Power Digital.

Good Luck!

guitar479
Posts: 3
Joined: Fri Nov 20, 2009 12:30 am

Re: Power for Original Big Box EHX POG

Post by guitar479 » Wed Mar 15, 2017 9:58 pm

Thanks!!

Post Reply