Page 1 of 1

Tech 21 Fly Rig on PP2+

Posted: Tue Jan 24, 2017 7:35 am
by manubsingh
Hello,

I've read two different posts on Tech 21 Fly Rig and incorporating it with my Voodoo Labs Pedal Power 2+, and couldn't seem to find the right answer since the threads didn't show their conclusion. I recently purchased this pedal and was wondering if I could either do the first option I saw of a) Using it in one of the first four positions, with the DIP switch set away from normal, or b) do I have to get a couple doubler to use it on my board?...or c) some other option?

I am hoping for a, because if I have to use a couple doubler, I wouldn't be able to use it I think because I have an Adrenalinn 3 which already has this (nor do I have more than one slot left!).

Please let me know and thanks!

Manu

Re: Tech 21 Fly Rig on PP2+

Posted: Wed Jan 25, 2017 12:32 pm
by JohnClark
I believe you can use any one of output 1-4 with the corresponding DIP switch set away from Normal for the Tech 21 Fly Rig 5, but I have not yet had the chance to test one of these out myself.

I'm not sure it makes much difference, but exactly which model of the Tech 21 Fly Rig do you have?

Re: Tech 21 Fly Rig on PP2+

Posted: Thu Jan 26, 2017 7:36 pm
by manubsingh
Hi John,

Yes I tried it and it works as you say. Standard VL PP2+ cable in slot 1 with the DIP switch said to away from normal. I have the standard Fly Rig 5, with the silver back and Plexi OD.

Thanks!