Noise issue with using of power 4x4 with 4 split adapter

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
jajc3162
Posts: 1
Joined: Sat Jan 21, 2017 9:41 am

Noise issue with using of power 4x4 with 4 split adapter

Post by jajc3162 » Sat Jan 21, 2017 10:01 am

As above I have 12 pedals but I use the 4 split adapter so that I can power up all my pedals but I'm having noise issue, my current set up is amp>eventide time factor>jhs alpine reverb>Mxr analog chorus>ep booster>Mxr octave fuzz>mission vm pro>pinnacle distortion>jhs double barrel>sl drive>sp compressor> polytune mini>sc95 wah>guitar.
Basically one of it power the pinnacle and double barrel
The other one power the sl drive and sp compressor
The other one power the polytune mini and sc95 wah
The other one power the vm pro and octave fuzz
3 of it are connected to the high current output
While 1 of it is connected to the 100 ma
The rest are power with one channel
So any advise on this issue?

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Noise issue with using of power 4x4 with 4 split adapter

Post by JohnClark » Wed Jan 25, 2017 12:17 pm

I think you will need to break things down a little to find the offending pedals. Try running you guitar thru just the two pedals on the splitter to test if that is the source of the noise.

Also exactly which two pedals are on the 100mA Output?

Post Reply