VOLTAGE CHANGE

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
florchiza
Posts: 3
Joined: Mon Jan 16, 2017 4:46 pm

VOLTAGE CHANGE

Post by florchiza » Mon Jan 16, 2017 4:55 pm

Hello , i have to bring the voltage from 220V to 120V , this thing will work?
Attachments
Sin título.jpg
Sin título.jpg (98.85 KiB) Viewed 1106 times

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: VOLTAGE CHANGE

Post by JohnClark » Wed Jan 18, 2017 9:18 am

That should be fine.

I hope that helps!

florchiza
Posts: 3
Joined: Mon Jan 16, 2017 4:46 pm

Re: VOLTAGE CHANGE

Post by florchiza » Wed Jan 18, 2017 5:09 pm

For a voodoolab plus 2? , it should work with no problem ?

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: VOLTAGE CHANGE

Post by JohnClark » Wed Jan 18, 2017 6:49 pm

A fully loaded Pedal Power 2+ will consume less than 20 Watts. If you will be powering anything from the Courtesy Outlet add its Wattage rating to to find your minimum need.

The step down you show is rated for 50 Watts.

I hope that helps!

Post Reply