Pedal Power 2+ Power question

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
rotnroby
Posts: 1
Joined: Wed Jan 04, 2017 10:15 am

Pedal Power 2+ Power question

Post by rotnroby » Wed Jan 04, 2017 10:24 am

I have a PP2+ just wondering if I can use a TC Nova delay and a Neo mini vent both require 12v then I have 4 other low power pedals that go along with the Pedal Train Jr a total of 6 pedals. Will this work and what do I need if so?? Thanks, rotnroby. :?:

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal Power 2+ Power question

Post by JohnClark » Wed Jan 04, 2017 10:33 am

Both the Mini Vent and the Nova Delay can be powered from output 5 or 6 with the corresponding DIP switch set away from Normal.

The Mini Vent will need a Reverse Polarity Barrel Cable since it has a Center Positive 2.1mm power jack.

The Nova Delay will use one of the included standard all black barrel cables.

I hope that helps!

Post Reply