Just bought a PP2 to run my pedals through and I turned on my Fender DeVille to a dangerously loud hum. I tested each pedal and it seems that my two EHX pedals are the cause. They are both running into the Line 6 plugs of the PP2 and everything is set at normal. If I unplug the EHX pedals from the PP2 and run them through their original power supplies, keeping the other pedals plugged into the PP2, the hum stops, or at least is at an acceptable level.
From everything I’ve read, I’m doing everything right. But there’s still the issue.
General discussion and tech talk about the industry standard Pedal Power line of power supplies.
2 posts • Page 1 of 1