Pt-vdl-mk brackets and the mondo

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
mothyham
Posts: 7
Joined: Tue Jul 12, 2016 3:42 pm

Pt-vdl-mk brackets and the mondo

Post by mothyham » Thu Jul 14, 2016 11:52 am

Am I an idiot or do these brackets not line up flush with the top of the unit?

JohnClark
Posts: 7133
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pt-vdl-mk brackets and the mondo

Post by JohnClark » Thu Jul 14, 2016 12:33 pm

The Pedaltrain brackets are not as tall as the Pedal Power since the bracket lays on the bottom of the pedaltrain rails, but chassis of the Pedal Power fits up in-between the Pedaltrain rails...

Here is a picture of the bracket mounted to the Pedal Power chassis.
PTbracket-1.jpg
Here is a picture of the Pedal Power with the mounted bracket set into a Pedaltrain.
PTbracket-2.jpg

I hope that helps!

mothyham
Posts: 7
Joined: Tue Jul 12, 2016 3:42 pm

Re: Pt-vdl-mk brackets and the mondo

Post by mothyham » Thu Jul 14, 2016 3:17 pm

Thank you John Clark.
I was trying to visualize how it fit before my board came in the mail....made no sense to me!
now, with your help, I understand completely!
Thank you John.

NoelEiffe
Posts: 2
Joined: Wed Jan 11, 2017 5:05 pm

Re: Pt-vdl-mk brackets and the mondo

Post by NoelEiffe » Wed Jan 11, 2017 5:08 pm

John....(or anyone...)

So with the setup on the Mondo, some of the side bracket covers the side vents on the unit. Is it safe to do this? There are other vents obviously, but...?

NoelEiffe
Posts: 2
Joined: Wed Jan 11, 2017 5:05 pm

Re: Pt-vdl-mk brackets and the mondo

Post by NoelEiffe » Wed Jan 11, 2017 5:11 pm

Ah...just saw this question is answered in a different thread....the idea being that bracket will act as a heat sink of its own. OK, thanks!

JohnClark
Posts: 7133
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pt-vdl-mk brackets and the mondo

Post by JohnClark » Thu Jan 12, 2017 10:49 am

NoelEiffe wrote:Ah...just saw this question is answered in a different thread....the idea being that bracket will act as a heat sink of its own. OK, thanks!
Glad we could help! ;)

Post Reply