PPAC / GCX+GCP

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
BigDogMKV
Posts: 7
Joined: Wed Sep 30, 2009 5:00 pm

PPAC / GCX+GCP

Post by BigDogMKV » Fri Oct 23, 2009 8:01 pm

I see that the PPAC can be used to power the GCX/GCP. Where do I find the cable to to go from the GCX multi pin to the barrel for connecting to the PPAC?

mibu
Posts: 56
Joined: Thu May 21, 2009 1:13 pm
Location: Timisoara/Romania/Europe
Contact:

Re: PPAC / GCX+GCP

Post by mibu » Sat Oct 24, 2009 6:15 am

you can easily build your own cable, by cutting the original gcx cable and mounting a small barrel for the PPAC...

BigDogMKV
Posts: 7
Joined: Wed Sep 30, 2009 5:00 pm

Re: PPAC / GCX+GCP

Post by BigDogMKV » Sat Oct 24, 2009 7:18 am

I thought so, but need to know the wiring for the GCX four pin cable to the barrel.

Thanks!

mibu
Posts: 56
Joined: Thu May 21, 2009 1:13 pm
Location: Timisoara/Romania/Europe
Contact:

Re: PPAC / GCX+GCP

Post by mibu » Sat Oct 24, 2009 7:41 am

the two pins on the left side goes together and the two on the right also together. no + and - because it's AC...

BigDogMKV
Posts: 7
Joined: Wed Sep 30, 2009 5:00 pm

Re: PPAC / GCX+GCP

Post by BigDogMKV » Sat Oct 24, 2009 8:34 am

Cool, thanks!

Post Reply