Will the 4x4 power a HEX and a Ground Control Pro?

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Linus
Posts: 1
Joined: Fri Jun 24, 2016 8:52 pm

Will the 4x4 power a HEX and a Ground Control Pro?

Post by Linus » Fri Jun 24, 2016 9:00 pm

Hello,

Will a 4x4 adequately power a HEX audio loop switcher that is powering a ground control pro via a 5 pin MIDI cable?

According the your website the 4x4 digital power outputs are 400ma. The HEX wants 100ma and the Ground Control Pro wants 500ma so combined they want to see 600ma.

Can I get by with the 4x4?

JohnClark
Posts: 7133
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Will the 4x4 power a HEX and a Ground Control Pro?

Post by JohnClark » Tue Jun 28, 2016 12:58 pm

You would need to use two of the high current 9V outputs connected together using a Current Doubler Adapter in order to reliably power both a HEX and a Ground Control Pro.

I hope that helps!

Post Reply