Page 2 of 2

Re: Pedal Power 2 Plus and Tech 21 Fly Rig 5

Posted: Tue Mar 06, 2018 10:38 am
by idplmalx
Is it possible to use output 6 on the PP2+ with the Flyrig?

IF I'm reading it correctly, the manual says: Dip Switch ON (away from normal) gives you 12v and 200ma+, so that should work, but I feel like there's something I'm missing...

Re: Pedal Power 2 Plus and Tech 21 Fly Rig 5

Posted: Tue Mar 06, 2018 3:20 pm
by JohnClark
idplmalx wrote:Is it possible to use output 6 on the PP2+ with the Flyrig?

IF I'm reading it correctly, the manual says: Dip Switch ON (away from normal) gives you 12v and 200ma+, so that should work, but I feel like there's something I'm missing...
We haven't tested this setup to know for sure it will be OK. Outputs 5 and 6 are not regulated when switched away from Normal so we do not know for certain that the Fly Rig will see the 12V it wants.

What we know for certain will work reliably is to use a Current Doubler Adapter (the one with the Green end) to combine any two of outputs 1-4 with the corresponding DIP Switches set away from Normal.

I hope that helps!

Re: Pedal Power 2 Plus and Tech 21 Fly Rig 5

Posted: Tue Mar 06, 2018 10:27 pm
by idplmalx
JohnClark wrote:
idplmalx wrote:Is it possible to use output 6 on the PP2+ with the Flyrig?

IF I'm reading it correctly, the manual says: Dip Switch ON (away from normal) gives you 12v and 200ma+, so that should work, but I feel like there's something I'm missing...
We haven't tested this setup to know for sure it will be OK. Outputs 5 and 6 are not regulated when switched away from Normal so we do not know for certain that the Fly Rig will see the 12V it wants.

What we know for certain will work reliably is to use a Current Doubler Adapter (the one with the Green end) to combine any two of outputs 1-4 with the corresponding DIP Switches set away from Normal.

I hope that helps!
Indeed it does, thanks!