Do these work with Pedal Power Plus 2?

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
michaelgrgas
Posts: 10
Joined: Sat Aug 29, 2009 11:23 am

Do these work with Pedal Power Plus 2?

Post by michaelgrgas » Sat Aug 29, 2009 11:37 am

I'm looking into purchasing the PPP2 and wanted to know if the following pedals work with it:
  • Electro-Harmonix Holy Grail Reverb
    Electro-Harmonix Big Muff
    Digitech Whammy
    Line 6 MM4 Modulation Modeler
I'm using those along with the following:
  • Boss DD-20 Gigadelay
    Boss OC-2 Octave
    Boss Noise NS-2 Suppressor
    Boss Chromatic Tuner
    Ibanez Tube Screamer
    Dunlop 535Q Crybaby Wah
If the top list does work with the PPP2, would I need 2 of them to run all together? Also, would the Pedal Switcher be able to recognize the 4 switches on the Line 6 MM4 or would it treat it as one pedal?

Thanks in advance for any help!
Michael

JohnClark
Posts: 7133
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Do these work with Pedal Power Plus 2?

Post by JohnClark » Wed Sep 09, 2009 12:49 pm

The Pedal Power 2+ can power all these pedals except for the Whammy. The Whammy requires AC power only. A Pedal Power AC could power the Whammy and the DL-4 as well as two Pedal Switchers, leaving the other eight pedals for the Pedal Power 2+.
There is no provision on the DL-4 to remotely control its switches.

michaelgrgas
Posts: 10
Joined: Sat Aug 29, 2009 11:23 am

Re: Do these work with Pedal Power Plus 2?

Post by michaelgrgas » Thu Sep 10, 2009 12:46 pm

Thanks so much John. This helps a lot.

Post Reply