PP2+ and Digitech Digiverb

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Posts: 2
Joined: Fri Jul 31, 2009 2:06 pm

PP2+ and Digitech Digiverb

Post by unadan » Fri Jul 31, 2009 2:08 pm

The digiverb requires 9V DC negative center tip 300 ma minimum. Does that mean I cannot power it with the PP2+?

Posts: 7439
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PP2+ and Digitech Digiverb

Post by JohnClark » Fri Jul 31, 2009 2:11 pm

The DigiVerb draws considerably less than the 300mA that the optional PS200R wall wort is capable of providing. You should be able to power the DigiVerb from any of the outputs on a Pedal Power 2+ with the DIP switch set to Normal.
---------==Voodoo Lab Magician & Tech==---------

Post Reply