Hey folks,

I'm in New Zealand. Have had a PP2+ for years and love it, no problems powering any of my pedals until now...

What does it take to get a Diamond Vibrato going? When I bought it from True Tone in LA they gave me a voltage doubler but it doesn't seem to work. Have tried inputs 3 & 4 and also 5 & 6 incase its a higher milliamp draw. Nothing. On the same board I am running a big box DMM (inputs 1 & 2) that also uses a doubler and goes fine.

Only thing I notice is the end on one cable is red and the other is black...look like the same cable but does that color mean something?

Help!

You need the PPREV (reverse polarity) cable plus the voltage doubler adapter (PPAY cable). What I'm told is to use any of the two Pedal Power inputs in normal position, and plug the two "Y" ends of the PPAY cable into any two of the 9-volt inputs on the Pedal Power. Then with your PPREV cable, plug the black end into the remaining end of the PPAY cable, and the white end into the Diamond Vibrato pedal for reverse polarity. That will give you 18 volts. I think with inputs 5 & 6, you can flip the switch away from normal to get 24 unregulated volts.

Yep.

To power your Diamond Vibrato use Pedal Power 2 Plus outputs 5 and 6, DIP switches set NORMAL with a voltage doubler adapter (part# PPAY $6.00ea.) and a reverse polarity 2.1mm cable (part# PPREV $3.50ea.).

You can order our cables and adapters online.

To do so, please visit our Cable Purchase web page.
Here is the link: http://www.voodoolab.com/shop/index.php?cPath=22