To power all from a single Pedal Power 2 Plus, you will need a Current Doubler Adapter (part# PPAP) and an Output Splitter Adapter (part# PPAV), setup as follows:
To power your Line 6
DL4 use Pedal Power 2 Plus outputs 5 or 6, DIP switch AWAY from NORMAL and the reverse polarity cable (red/black connectors) supplied w/ your Pedal Power 2 Plus (part# PPL6).
To power your Line 6
MM4 use Pedal Power 2 Plus outputs 5 or 6, DIP switch AWAY from NORMAL and the reverse polarity cable (red/black connectors) supplied w/ your Pedal Power 2 Plus (part# PPL6).
To power your
POG 2 use a Current Doubler Adapter (part# PPAP, $6.00ea.) in any two Pedal Power 2 Plus, DIP switches set NORMAL and one of the all black (standard polarity) cables supplied.
To power your
TU-2 use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied.
To power your
NS-2 use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied.
To power your
Joyo Vintage Overdrive use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied.
To power your
WD-1 use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied.
handmade volume pedal that consumes 21mA. - Likely the same as the Boss pedals but that's just my guess.
The
Whammy (models: Whammy WH-1, Whammy XP-100, Whammy II, Bass Whammy, Whammy IV and 20th Anniversary) requires AC power and cannot power from the DC outputs of your Pedal Power 2 Plus. However, you can use the courtesy outlet to power your Whammy with its adapter. Note: Pedal Power AC can power your Whammy.
You can order our cables and adapters online.
To do so, please visit our Cable Purchase web page.
Here is the link:
http://www.voodoolab.com/shop/index.php?cPath=22 
