PP2+ Eventide TF, Boss RC30, TC Electronics, BB pre, Foxrox

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
ak47
Posts: 9
Joined: Thu May 21, 2009 2:57 am
Location: Sweden

PP2+ Eventide TF, Boss RC30, TC Electronics, BB pre, Foxrox

Post by ak47 » Sun Mar 11, 2012 3:02 pm

I have had a Pedal Power 2 Plus a long time now. I'm still happy :mrgreen:

I just recently noticed an update in the PP2+ manual that now recommends using a Current Doubling Adapter in outputs 5 and 6 with their DIP switches set AWAY from NORMAL with the red reverse polarity cable to safely power the Eventide Timefactor.

This was not in the manual that came with my PP2+ so I hope it is still ok to power my TF this way?

Basically, will my PP2+ work ok powering this board?

Outlet 1 - TC polytune (current draw 50 mA @ 9vDC)
Outlet 2+3 with current doubling adapter - Boss RC30 looper (current draw 195 mA @ 9vDC - usually uses a PSA series AC Adaptor)
Outlet 4 - Xotic BB preamp (current draw 6 mA @ 9vDC)
Outlet 5+6 with current doubling adapter - Eventide TF
Outlet 7 - Foxrox Hot Silicon fuzz (low current draw @ 9vDC)
Courtesy AC outlet - TC SCF stereo chorus flanger using a reverse IEC connector.

Thanks!

ak47
Posts: 9
Joined: Thu May 21, 2009 2:57 am
Location: Sweden

Re: PP2+ Eventide TF, Boss RC30, TC Electronics, BB pre, Fox

Post by ak47 » Mon Mar 26, 2012 10:49 am

Bump :mrgreen:

JohnClark
Posts: 7388
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PP2+ Eventide TF, Boss RC30, TC Electronics, BB pre, Fox

Post by JohnClark » Thu Apr 26, 2012 5:54 pm

Wow... I guess we missed a few here... sorry about that!

The update to the manual was simply to keep it current with pedals that hadn't yet been released when the original manual was printed. I hope you haven't been waiting all this time without getting to play, but your Pedal Power 2+ will work just fine to power your pedals as you described above.
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

ak47
Posts: 9
Joined: Thu May 21, 2009 2:57 am
Location: Sweden

Re: PP2+ Eventide TF, Boss RC30, TC Electronics, BB pre, Fox

Post by ak47 » Mon Apr 30, 2012 6:05 am

JohnClark wrote:Wow... I guess we missed a few here... sorry about that!
No problem... seriously! I am just grateful these forums exist and are moderated!

Thanks John!

Post Reply