Voodoo Lab Pedal Power 2 Plus Question

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
petebuilt
Posts: 1
Joined: Wed Feb 08, 2012 5:25 pm

Voodoo Lab Pedal Power 2 Plus Question

Post by petebuilt » Wed Feb 08, 2012 5:42 pm

Greetings,

I am a new Voodoo Lab/ pedalboard owner, thus this question that probably has a simple answer.

I just got a Voodoo Lab Pedal Power 2 Plus supply, which is mounted in a Pedaltrain ll.
What do I do if I want to use more than (7) 9V pedals?
Would I have to use an additional Voodoo Lab power unit?

Currently I have:

MXR Phase 90
MXR Distortion Plus
MXR Dyna Comp
Cry Baby Wah
Morley Mini Volume
Rogue Chorus
Rogue Blues Distortion

I would also like to add an MXR Carbon Copy Delay as the seventh pedal.

Thanks,

Pete

loerdevi
Posts: 12
Joined: Wed Jan 18, 2012 12:11 pm

Re: Voodoo Lab Pedal Power 2 Plus Question

Post by loerdevi » Wed Feb 29, 2012 3:24 pm

you should be able to run eight (8) 9V pedals from the Pedal Power 2+. As long as the current draw isn't too high (more than ~150MA per pedal) you should be good to go I think. Also if you have a pedal (or in my case a wireless unit) that requires more milliamps. Just use outputs 5 and 6.

Hope that helps.

DJ
Mothra J Mothington III

Post Reply