It is currently Tue Sep 02, 2014 11:55 pm

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Eventide pedals
PostPosted: Wed Feb 08, 2012 7:17 am 
Offline

Joined: Wed Jan 11, 2012 3:17 am
Posts: 3
Hi !

It's said that PedalPower2plus can power eventide pitchfactor with a "Y cable current doubling" used to combine both outputs 5 and 6 with switches away from normal.

In the PP2plus specifications, DIP switches 5&6 in ON position give 50/200mA+. So 200 * 2 = 400mA. I'ts not enought because Pitchfactor needs 1200mA !!!

If switches are away from normal, the voltage isn't 9V but 14,5V/12V. The Eventide needs only 9V.
So where's the mistake ?

200mA+ = more than 200mA ? How much ???

I'm lost !!!!! Hellllllpppppppp.

Thank you very much !


Top
 Profile  
 
 Post subject: Re: Eventide pedals
PostPosted: Fri Feb 17, 2012 7:06 am 
Offline

Joined: Wed May 25, 2011 11:19 am
Posts: 2
Eventide over rated the current draw in their specs. It will work just fine with the current doubler cable.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron