It is currently Mon Nov 20, 2017 8:47 am

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: If Reverse Polarity Means Positive Center then say that?
PostPosted: Sun Jul 12, 2009 9:15 am 
Offline

Joined: Sun Jul 12, 2009 8:50 am
Posts: 6
I've always been a little electronic phobic despite my many attempts to grasp the nature of it. Kind Even after I built a few projects I still don't get the basics like series parallel. So it should be clear. It would be clear if I could figure it out but I can't. Please make it simpler to understand.

Does anyone know which cable I want to get to power a Radial Tonebone trimode with 15VDC 400mA, center pole positive with my pp2+. I am guessing it is one of these to narrow it down: ppy, ppeh24, diamond pp2+ 18v for memory lane?


Top
 Profile  
 
 Post subject: Re: If Reverse Polarity Means Positive Center then say that?
PostPosted: Sun Jul 12, 2009 10:31 am 
Offline
Site Admin

Joined: Tue Mar 10, 2009 11:36 pm
Posts: 177
emergere wrote:
Does anyone know which cable I want to get to power a Radial Tonebone trimode with 15VDC 400mA, center pole positive with my pp2+. I am guessing it is one of these to narrow it down: ppy, ppeh24, diamond pp2+ 18v for memory lane?

There is no 15V output from the PP2+. For that, you'll have to wait until Pedal Power Versa is released.

A reverse polarity cable means that it is cross-wired so that it reverses the polarity. The PP2+ outputs are specified as center negative, so connecting them with a reverse polarity cable results in center positive.

Josh Fiden
Founder / CEO


Top
 Profile  
 
 Post subject: Re: If Reverse Polarity Means Positive Center then say that?
PostPosted: Mon Jul 13, 2009 8:01 am 
Offline

Joined: Sun Jul 12, 2009 8:50 am
Posts: 6
Thank for letting me know. Any idea when the Versa will start shipping? The buzz is starting to hum.
http://www.spectrumaudio.com/voodoo-lab ... versa.html


Top
 Profile  
 
 Post subject: Re: If Reverse Polarity Means Positive Center then say that?
PostPosted: Mon Jul 13, 2009 2:30 pm 
Offline

Joined: Wed Jun 17, 2009 12:18 am
Posts: 11
Josh Fiden wrote:
emergere wrote:
Does anyone know which cable I want to get to power a Radial Tonebone trimode with 15VDC 400mA, center pole positive with my pp2+. I am guessing it is one of these to narrow it down: ppy, ppeh24, diamond pp2+ 18v for memory lane?

There is no 15V output from the PP2+. For that, you'll have to wait until Pedal Power Versa is released.

A reverse polarity cable means that it is cross-wired so that it reverses the polarity. The PP2+ outputs are specified as center negative, so connecting them with a reverse polarity cable results in center positive.

Josh Fiden
Founder / CEO

With the PP2+, could you use the PPY cable with one connector plugged into a 9V output and the other into a SAG output set to 6V? Yeah, you'd need a voltmeter to make sure it was set to 6V, and it'd be a little risky should the knob ever be inadvertently turned up, but could that work?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: