Voodoo Lab
http://www.voodoolab.com/forum/

Pedal Power ISO5 dimensions
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=20
Page 1 of 1

Author:  walpow [ Thu May 07, 2009 9:55 am ]
Post subject:  Pedal Power ISO5 dimensions

I'm putting a new board together and plan to buy an ISO5 as soon as it's available. I'd like the dimensions so I can leave the right amount of space.

Thanks,
Nathan

Author:  walpow [ Thu May 14, 2009 1:28 pm ]
Post subject:  Re: Pedal Power ISO5 dimensions

I feel neglected. Any info available?

Thanks,
Nathan

Author:  Josh Fiden [ Thu May 14, 2009 7:18 pm ]
Post subject:  Re: Pedal Power ISO5 dimensions

Hi Nathan,

Sorry you feel neglected! The Voodoo Lab forum has only been up a very short time, but we've had quite a few posts. It's great to see so much interest!

The Pedal Power ISO-5 will be 4.9" (124mm) wide x 3.4" (86mm) deep x 1.75" (44mm) tall.

Regards,
Josh Fiden
Founder / CEO

Author:  walpow [ Thu May 14, 2009 10:20 pm ]
Post subject:  Re: Pedal Power ISO5 dimensions

Thanks a million. Now to build a cardboard box that size to work around ...

Author:  Mark V [ Tue May 19, 2009 11:17 pm ]
Post subject:  Re: Pedal Power ISO5 dimensions

Looking forward to powering my T-Rex Replica with this. When are these shipping and since it is the same depth and height, but not as wide, as the PP2, can it still be mounted under the Pedaltrain Jr with the included mounting brackets? Thanks!!

Author:  Josh Fiden [ Wed May 20, 2009 12:03 am ]
Post subject:  Re: Pedal Power ISO5 dimensions

Mark V wrote:
Looking forward to powering my T-Rex Replica with this. When are these shipping and since it is the same depth and height, but not as wide, as the PP2, can it still be mounted under the Pedaltrain Jr with the included mounting brackets? Thanks!!

We're still finalizing the design, so no formal release date yet. It will definitely fit under the Pedaltrain.

The PP2+ can also power the Replica from outputs 5 or 6 with the DIP switch set away from normal.

Thanks!
Josh

Author:  Mark V [ Wed May 20, 2009 8:14 am ]
Post subject:  Re: Pedal Power ISO5 dimensions

Thanks Josh!!... one other question, the T-rex solution for slots 5/6 with the dip switch on works with the PP2+ and not the PP2, correct? Thanks for your help.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/