PP 2 outlet

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Posts: 7
Joined: Tue May 26, 2009 6:10 pm

PP 2 outlet

Post by md76 » Wed Jun 10, 2009 9:21 pm

Hi, I just want to now if I can plug a 1976 EH Electric mistress and a Butler tube driver both to the same pedal power AC outlet using a power strip? I know there is a 200 wats maximum but I dont know how much these pedals consume.

Thanks so much!

Posts: 117
Joined: Fri May 15, 2009 3:08 am
Location: New Zealand!

Re: PP 2 outlet

Post by Trueman » Fri Jun 26, 2009 3:12 pm

Yes you should have no problems with this at all.
Connoisseur of good tone.

http://www.john-trueman.com : Guitarist from Down Under

Posts: 1
Joined: Tue Jun 30, 2009 7:59 pm

Re: PP 2 outlet

Post by MRM1062 » Tue Jun 30, 2009 8:28 pm

Hey Guys,
I have 2 Radial pedals that can't power thru the PP 2, so do they make a reverse right angle cable that I can plug into the convenience (???) outlet to set-up a small power strip underneath my pedaltrain?

Post Reply