Vertex Effects Systems- Modding Voodoo Lab Pedal Power

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Desperado
Posts: 56
Joined: Sat Dec 05, 2009 4:45 pm
Location: Pt. Richmond, CA
Contact:

Vertex Effects Systems- Modding Voodoo Lab Pedal Power

Post by Desperado » Tue Jul 06, 2010 5:47 pm

After tinkering for a while, I've found pretty easy ways to mod the Voodoo Lab Pedal Power AC units, and forthcoming, the Voodoo Lab Pedal Power, Pedal Power 2, and Pedal Power 2+. The mods can changes voltages, AC/DC power changes, current increases, and more. These mods will allow you to power a M13, M9, Eventide Pedals, Musicom, Loopholic, and many others.

Below is a recently modded Voodoo Lab Pedal Power AC unit that a client needed to power high current 9VDC and 15VDC pedals. The traditional Voodoo Lab Pedal Power 2+ units couldn't be modded to power that high of a current draw, so we went with the AC.

We turned two of the 9/12 VAC sections on the right side to two outlets (one with 9VDC @ 1AMP, and one with 15VDC @ 1AMP). The two left 9VAC outs are still available to power AC pedals, but the two right outs will only do DC at the indicated voltages.

~Mason @ Vertex

Modded Voodoo Lab Pedal Power AC

Image

Before Modification

Image

After Modification

Image
VERTEX EFFECTS SYSTEMS
Custom Pedalboard Design
WEB: http://www.vertexeffectsystems.com
EMAIL: info@vertexeffectsystems.com

Post Reply