Pedal Power 2 + and Boss MD-500

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
cpetucco
Posts: 2
Joined: Fri Jan 10, 2014 2:15 am

Pedal Power 2 + and Boss MD-500

Post by cpetucco » Mon Nov 06, 2017 1:41 am

I am wondering if I can use the PP2+ to power the Boss MD-500. From what I have understood, output 5-6 can provide 250mA and the Boss MD-500 requires 225mA (https://www.boss.info/us/products/md-50 ... fications/). Can I use output 5 or 6 in normal mode (9V) then?

Thanks!
Top
JohnClark
Posts: 7163
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal Power 2 + and Boss MD-500

Post by JohnClark » Mon Nov 06, 2017 10:56 am

No problem! The MD-500 can be powered from output 5 or 6 with the corresponding DIP Switch set to Normal using one of the included standard all black barrel cables.

I hope that helps!
Top
Post Reply

Return to “Pedal Power®”