Need to power my looper

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
J J Gibb
Posts: 5
Joined: Tue Aug 27, 2019 7:41 pm

Need to power my looper

Post by J J Gibb » Tue Aug 27, 2019 7:50 pm

Hi, I’m new to this forum and have a question for you experienced peeps. I just bought a Voodoo Lab pedal power x4 to power a tuner and a wah pedal. I also wanted to power my DigiTech Jamman Solo looper but not sure if it’s possible. I’m definitely not saavy with ac, dc, current draws, etc. Any help would be much appreciated. Thank you.

Rez
Posts: 612
Joined: Thu Sep 01, 2011 10:31 am

Re: Need to power my looper

Post by Rez » Wed Aug 28, 2019 2:03 pm

Yes, it's fine.

To power the Jamman Solo with X4 use any 9VDC output with one of the all black (standard polarity) cables supplied.


Cheers!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

J J Gibb
Posts: 5
Joined: Tue Aug 27, 2019 7:41 pm

Re: Need to power my looper

Post by J J Gibb » Thu Aug 29, 2019 10:18 am

Okay, thanks for your response. The power supply that came with it says input 120ac and output 9.6dc. Like I mentioned, I’m not very saavy with this stuff and afraid I’m going to short put my pedal or something

Rez
Posts: 612
Joined: Thu Sep 01, 2011 10:31 am

Re: Need to power my looper

Post by Rez » Thu Aug 29, 2019 11:09 am

It's fine. Also/FYI, 9.3 - 9.6VDC is typical for most fresh 9V batteries and likewise for the 9VDC Pedal Power outputs... they will actual measure in this voltage range.

;)
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

J J Gibb
Posts: 5
Joined: Tue Aug 27, 2019 7:41 pm

Re: Need to power my looper

Post by J J Gibb » Thu Aug 29, 2019 8:40 pm

Awesome! Thanks for your help.

Post Reply