Page 1 of 1

Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2

Posted: Sun Jun 02, 2019 8:31 pm
by Ricardo
Hi all! I have a Pedal Power 4x4 and need help for powering these pedals:

- 1 Kingsley Jester V2 (500ma at 12VDC, according to the manufacturer)
- 1 Effectrode Mercury (350ma at 12VDC)

Can I safely power both of them using the two 12V outlets available? I already have the reverse polarity cables.

Thanks!

Re: Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2

Posted: Mon Jun 03, 2019 10:57 am
by Rez
Unfortunately, both cannot be powered from the 12VDC outputs.

Specifications on the Effectrode website indicate that the Mercury Tube Fuzz requires 12VDC and about 600mA.

As such, one or the other could be powered using the two 12VDC outputs and a Current Doubler Adapter, part# PPAP, but... not both.

Cheers!