Pedal Power 2 Plus with Line 6 M5

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
estiv
Posts: 3
Joined: Sat Mar 16, 2019 3:52 pm

Pedal Power 2 Plus with Line 6 M5

Post by estiv » Sat Mar 16, 2019 4:06 pm

I'm creating a new pedal setup and wanted to include a Line 6 M5. One reason I bought the Pedal Power 2 Plus was because I saw that it can work with some Line 6 products. However, I can't get the M5 to work using the supplied Line 6-compatible power cord. I did make sure to put the switch in the non-9V position. I know a POD wouldn't be compatible, but is the M5 also incompatible? If so, which Line 6 devices are compatible? Thanks in advance for any help.

Rez
Posts: 381
Joined: Thu Sep 01, 2011 10:31 am

Re: Pedal Power 2 Plus with Line 6 M5

Post by Rez » Mon Mar 18, 2019 10:33 am

Due to its high current requirement, a single output will not suffice...

To power the M5 with Pedal Power 2 Plus, use outputs 5 and 6, DIP switches set normal with a Current Doubler Adapter, part# PPAP and one of the all black (standard polarity) cables supplied.

Cheers!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

estiv
Posts: 3
Joined: Sat Mar 16, 2019 3:52 pm

Re: Pedal Power 2 Plus with Line 6 M5

Post by estiv » Tue Mar 19, 2019 9:30 pm

Thanks for the detailed explanation, I’ll give it a shot.

Rez
Posts: 381
Joined: Thu Sep 01, 2011 10:31 am

Re: Pedal Power 2 Plus with Line 6 M5

Post by Rez » Fri Mar 22, 2019 2:43 pm

;)
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

estiv
Posts: 3
Joined: Sat Mar 16, 2019 3:52 pm

Re: Pedal Power 2 Plus with Line 6 M5

Post by estiv » Sat Mar 23, 2019 3:59 pm

Worked perfectly. Thanks again.

Rez
Posts: 381
Joined: Thu Sep 01, 2011 10:31 am

Re: Pedal Power 2 Plus with Line 6 M5

Post by Rez » Mon Mar 25, 2019 9:46 am

Awesome and glad to know it, thanks!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

Post Reply