HX Stomp and PP2 AC auxiliary

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
KLGI
Posts: 2
Joined: Thu Oct 25, 2018 10:43 am

HX Stomp and PP2 AC auxiliary

Post by KLGI » Thu Oct 25, 2018 10:47 am

Is it ok to use a PP2+ Auxiliary to plug in the line 6 HX stomp to my board?
According to their manual, their draw is 9VDC 3A

thanks for your time

Rez
Posts: 307
Joined: Thu Sep 01, 2011 10:31 am

Re: HX Stomp and PP2 AC auxiliary

Post by Rez » Thu Oct 25, 2018 4:44 pm

Yes, it's perfectly fine to power your HX Stomp (with its adapter/wall-wart) from the Pedal Power 2 Plus AC courtesy outlet.


Cheers!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

KLGI
Posts: 2
Joined: Thu Oct 25, 2018 10:43 am

Re: HX Stomp and PP2 AC auxiliary

Post by KLGI » Fri Oct 26, 2018 6:07 am

Thanks Ben

PS-support from you guys has always been great

Rez
Posts: 307
Joined: Thu Sep 01, 2011 10:31 am

Re: HX Stomp and PP2 AC auxiliary

Post by Rez » Fri Oct 26, 2018 11:22 am

Thank you ;)
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

The Plunders
Posts: 1
Joined: Sat Feb 09, 2019 7:44 am

Re: HX Stomp and PP2 AC auxiliary

Post by The Plunders » Sat Feb 09, 2019 7:51 am

I'm using the courtesy/aux on a PP2 to power my HX Stomp but the orientation of the Line 6 adapter causes it to stick straight up. Is there an adapter of some sort that can turn the PP2 aux output 90 degrees so that the HX Stomp adapter runs parallel to the front of the pedal board? Anyone had this issue? Found a solution?

Post Reply