I have the Pedal Power 2+. I am trying to effectively power the Strymon Blue Sky and the Eventide Time Factor. I have the current doubler, and use it on output 5-6 (switches on like the manual suggest) to power the Eventide. I use the outlet on the back to power my HumDebugger (7v ac) so that is out of the question.

Now the Blue Sky doesn't have a 250ma 9V spot.

My two ODs and tuner only use 3 of the regular 100ma 9v outs, so I have 3 9V to work with.

Could I run the eventide out of one of the line 6 outlets like other post suggest? or would it be better to double a line 6 out and a regular out to get 350ma and take my chances running the eventide?

Or last ditch use two current doublers and combine my 3 remaining 100ma outs, to get 300ma for my Blue Sky?

Thoughts?

In your case, it would probably be best to try running the Eventide from outputs 6 and 7 (or 5 and 4) using the Current Doubler cable, and run the Blue Sky from the unused high current output. All three DIP switches will be set to Normal.

I hope that helps!