Current Touring Rig

Share pictures of your racks and pedalboards featuring Voodoo Lab products.
Mr. T
Posts: 16
Joined: Tue Oct 06, 2009 8:06 am

Current Touring Rig

Post by Mr. T » Sun Oct 25, 2009 1:52 am

Hey guys - here's my current touring rig snapped at a radio session yesterday. I'm waiting on a combined head / rack case. cab is a bogner 412 w/ v30's. GCX was modified with hardwired loops, a custom front-panel interface and blue LED's. It's a versatile and great sounding set-up with a relatively small foot print.
cheers
tommy

Image
Image
Image
Image

Trueman
Posts: 117
Joined: Fri May 15, 2009 3:08 am
Location: New Zealand!
Contact:

Re: Current Touring Rig

Post by Trueman » Sun Oct 25, 2009 5:52 pm

Looks great, Square 1 mod to the GCX?
Connoisseur of good tone.

http://www.john-trueman.com : Guitarist from Down Under
http://www.guitarpedals.co.nz

Mr. T
Posts: 16
Joined: Tue Oct 06, 2009 8:06 am

Re: Current Touring Rig

Post by Mr. T » Tue Nov 03, 2009 2:04 am

Well spotted, man! Yeah Jason did some mods to my GCX. All the outboard connections are bought out-front turning the front panel into an interface. There's a locking input for the guitar, XLR connection for the GC Pro and sends/returns to the amp FX loop and to the tuner, which i have in loop one on a send only for silent tuning and so i don't have to have the tuner in-line when it's not being used. Loops 1-3 and 4-8 are hard wired together so i can still run some fx (OD's etc) in front of the amp and everything else in the loop. Oh, and there are blue LED's!

T

ihave27frets
Posts: 4
Joined: Thu Oct 08, 2009 7:03 pm
Location: Tampa

Re: Current Touring Rig

Post by ihave27frets » Sat Mar 13, 2010 10:02 pm

What type of locking plug was put in that GCX for the guitar cable?
Last edited by ihave27frets on Tue Mar 16, 2010 11:45 am, edited 1 time in total.

The Blue Letter
Posts: 67
Joined: Sun Sep 06, 2009 7:26 pm
Location: Richmond, Va.
Contact:

Re: Current Touring Rig

Post by The Blue Letter » Mon Mar 15, 2010 1:13 pm

do you have any close up pics of the front panel of the modded GCX. I am really curious about this. Thanks a lot.
Dan
loud, louder, loudest

Mr. T
Posts: 16
Joined: Tue Oct 06, 2009 8:06 am

Re: Current Touring Rig

Post by Mr. T » Thu Mar 18, 2010 3:33 am

here's a shot of the modded GCX before the outputs were labeled. The far right ones go to the send and return of the amps fx loop and the other two nearest the camera are a tuner send and the main send to the amp input. Loops 1-3 are hardwired for pedals that sit in front of the amp and loops 4-8 are hardwired for stuff that sits in the amps loop. Oh, and the LED's are blue!

Image

The Blue Letter
Posts: 67
Joined: Sun Sep 06, 2009 7:26 pm
Location: Richmond, Va.
Contact:

Re: Current Touring Rig

Post by The Blue Letter » Fri Mar 19, 2010 7:06 am

Hey thanks for the pic. It looks great! I have modded all the LED's on my GCX's too.
So the two Thru jacks are sends to your tuner's input, and to the input on your amp?
and then the two jacks at the opposite end are your send and return for your effects loop? Just wanted to make sure I understood... Thanks again for sharing.
loud, louder, loudest

Mr. T
Posts: 16
Joined: Tue Oct 06, 2009 8:06 am

Re: Current Touring Rig

Post by Mr. T » Sat Mar 20, 2010 1:17 am

you got it man. thru 1 goes to the amp input, thru 2 to the tuner on my pedalboard and the other two ins/outs go to the amps fx loop send and returns. It saves having a separate interface unit or to have to go into the back of the rack to hook everything up every time.
Here's a few more recent pics of things wired up a little tidier.

T

Image
Image
Image
Image
Image
Image
Image

skip
Posts: 10
Joined: Fri Apr 30, 2010 5:32 pm

Re: Current Touring Rig

Post by skip » Fri Apr 30, 2010 5:44 pm

man my little pedalboard seems so small now

Bob Barcus
Posts: 4
Joined: Wed Dec 30, 2009 7:29 pm

Re: Current Touring Rig

Post by Bob Barcus » Wed May 12, 2010 7:09 pm

Cool Job Where did you get the Audio cable jacks from They cool real pro

Post Reply