Search found 517 matches

by Rez
Mon Apr 20, 2020 5:14 pm
Forum: Pedal Power®
Topic: Akai Head Rush
Replies: 1
Views: 1138

Re: Akai Head Rush

Although it's working, it may be under-performing too (due to its needing higher current).

To power the Akai Head Rush Delay with Pedal Power 2 Plus, use output 5 or 6, DIP switch in the 9V (normal) setting.

Cheers!
by Rez
Mon Apr 20, 2020 5:08 pm
Forum: Pedal Power®
Topic: Daisy chain vs. dedicated connection
Replies: 1
Views: 1096

Re: Daisy chain vs. dedicated connection

To power the Digitech Drop with Pedal Power 2 Plus, use output 5 or 6, DIP switch in the 9V (normal) setting with one of the all black (standard polarity) cables supplied. The rest can power from any 9VDC output, each. Daisy-chaining is indeed a common way to introduce noise into the signal but as t...
by Rez
Mon Apr 20, 2020 4:56 pm
Forum: Pedal Power®
Topic: Pedal Power 2 plus issues
Replies: 1
Views: 1081

Re: Pedal Power 2 plus issues

I'm sorry to know it.

Please, call us or send us an email ( info@voodoolab.com ) we are glad to arrange for its inspection and repair.

Cheers!
by Rez
Mon Apr 13, 2020 2:27 pm
Forum: Pedal Power®
Topic: Incorrect current plugged into a 2+
Replies: 3
Views: 1176

Re: Incorrect current plugged into a 2+

If the pedal is working properly powered from 5 or 6 as discussed, there should be no need for concern. And, you can power pedals on/off as desired. Typically, that means leaving all your pedals connected to the power supply and simply plugging-in/unplugging the power supply itself but it's also fin...
by Rez
Mon Apr 13, 2020 10:32 am
Forum: Pedal Power®
Topic: Incorrect current plugged into a 2+
Replies: 3
Views: 1176

Re: Incorrect current plugged into a 2+

As long as you were using the correct voltage and polarity and it was simply that the Walrus Audio Luminary V2 was not receiving enough current, that would not normally cause any damage. And, since the pedal and power supply seem to be still working, most certainly... no damage was caused. That said...
by Rez
Thu Apr 09, 2020 4:25 pm
Forum: Pedal Power®
Topic: recommendations for Irig Stomp I/O and wammy Ricochet
Replies: 1
Views: 954

Re: recommendations for Irig Stomp I/O and wammy Ricochet

The Whammy Ricochet has an actual current draw of 235 mA and can be powered from any of our current production DC power supplies. To power the Whammy Ricochet use a 9VDC high current capacity (250mA or 400mA) output with one of the all black (standard polarity) cables supplied. But, the iRig would n...
by Rez
Thu Apr 09, 2020 4:18 pm
Forum: Pedal Power®
Topic: AC Outlet
Replies: 1
Views: 820

Re: AC Outlet

Yes, it is completely fine to use the AC courtesy outlet as you've described.

Cheers!
by Rez
Thu Apr 09, 2020 4:17 pm
Forum: Pedal Power®
Topic: Can I use 2wv Mondo in America?
Replies: 1
Views: 671

Re: Can I use 2wv Mondo in America?

To use a 220-240VAC model Pedal Power supply in the USA (120VAC), you would need to also use a step up/down transformer.

Here are some examples:

step up/down transformer 1

step up/down transformer 2

step up/down transformer 3


Note: a power rating of about 200 watts is sufficient.


Cheers!
by Rez
Wed Apr 08, 2020 11:03 am
Forum: Pedal Power®
Topic: can an old pedal power 2 power a Line 6 M5 at all?
Replies: 1
Views: 619

Re: can an old pedal power 2 power a Line 6 M5 at all?

Indeed... not possible from the DC outputs. With the older Pedal Power 2 (not 2 Plus) outputs 5 and 6 do not have high current capacity in the 9V setting, thus, even used together with a current doubler adapter, they will not suffice to power the M5. However, you can power it from the AC courtesy ou...
by Rez
Tue Apr 07, 2020 11:42 am
Forum: Pedal Power®
Topic: PP2+ Voltage Question
Replies: 3
Views: 779

Re: PP2+ Voltage Question

;)