Search found 359 matches

by Rez
Fri Jun 07, 2019 11:59 am
Forum: Pedal Power®
Topic: PPL6 vs PPREV for reverse polarity
Replies: 3
Views: 462

Re: PPL6 vs PPREV for reverse polarity

The PPL6 can also be used, but... the 2.1mm Reverse Polarity Barrel Cable, part# PPREV, PPREV-R is the better option as its 2.1mm white end makes a more snug connection with the 2.1mm pin in the pedal's power jack (whereas the PPL6 red end fits 2.5mm).


Cheers!
by Rez
Fri Jun 07, 2019 11:52 am
Forum: Pedal Power®
Topic: Splitter cable ground lifted issue
Replies: 3
Views: 538

Re: Splitter cable ground lifted issue

Try testing the pedals with also the guitar/audio cables attached:

Guitar => Pedal 1 => Pedal2 => Amp

Any better?
by Rez
Mon Jun 03, 2019 10:57 am
Forum: Pedal Power®
Topic: Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2
Replies: 1
Views: 527

Re: Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2

Unfortunately, both cannot be powered from the 12VDC outputs. Specifications on the Effectrode website indicate that the Mercury Tube Fuzz requires 12VDC and about 600mA . As such, one or the other could be powered using the two 12VDC outputs and a Current Doubler Adapter, part# PPAP , but... not bo...
by Rez
Mon Jun 03, 2019 9:58 am
Forum: Pedal Power®
Topic: EHX Nano Pog with PP2+
Replies: 1
Views: 448

Re: EHX Nano Pog with PP2+

To power the Nano POG with Pedal Power 2 Plus, use any output, DIP switch set normal and one of the all black (standard polarity) cables supplied.


Cheers!
by Rez
Wed May 22, 2019 9:24 am
Forum: Pedal Power®
Topic: Old Voodoo Lab power supply
Replies: 1
Views: 571

Re: Old Voodoo Lab power supply

Specification for Pedal Power (original/earliest model):

With the DIP switch in the ON position (away from the number), all 8 outputs supply 9VDC @ 80mA.

With the DIP switch in the OFF position (towards the number), all 8 outputs supply 12.3 VDC @ a little less than 80mA.


Cheers!
by Rez
Mon May 20, 2019 12:41 pm
Forum: Pedal Power®
Topic: Tape Delay AND Whammy?
Replies: 3
Views: 614

Re: Tape Delay AND Whammy?

;)
by Rez
Mon May 20, 2019 10:40 am
Forum: Pedal Power®
Topic: Tape Delay AND Whammy?
Replies: 3
Views: 614

Re: Tape Delay AND Whammy?

I'd check to confirm that the supply is not getting hot (but warm is fine). If it's not getting hot and the pedals are all working, I'd power them all exactly as you've specified... Rock on.

Otherwise, perhaps power the Whammy from the AC courtesy outlet with its adapter/wall-wart.

Cheers!
by Rez
Tue May 14, 2019 10:13 am
Forum: Pedal Power®
Topic: PP2+ DIP Switches
Replies: 1
Views: 508

Re: PP2+ DIP Switches

Pedal Power 2 Plus DIP switch function: Setting any DIP switches 1-8 to NORMAL/9V will put the corresponding output 1-8 into its 9VDC setting . Setting any DIP switches 1-6 to away from NORMAL will put the corresponding output 1-6 into its 12VDC setting . Setting any DIP switches 7-8 to away from N...
by Rez
Mon Apr 29, 2019 10:16 am
Forum: Pedal Power®
Topic: PP2+ and EHX Stereo MM Hazarai
Replies: 1
Views: 531

Re: PP2+ and EHX Stereo MM Hazarai

Yes.

To power the Stereo Memory Man with Hazarai use Pedal Power 2 Plus output 5 or 6, DIP switch set normal with one of the all black (standard polarity) cables supplied.

Cheers!
by Rez
Fri Apr 26, 2019 10:59 am
Forum: Pedal Power®
Topic: Vibe-Baby power supply
Replies: 1
Views: 468

Re: Vibe-Baby power supply

To power the 18V Classic Amplification Vibe Baby with Pedal Power ISO-5, simply use the 18V output with one of the all black (standard polarity) cables supplied. Or, to power the 18V Classic Amplification Vibe Baby with Pedal Power 2 Plus, use outputs 5 and 6, DIP switches set to NORMAL (9V), with a...