Search found 403 matches

by Rez
Tue Oct 04, 2011 3:54 pm
Forum: Pedal Power®
Topic: Pedal Power 2 and Fuchs Replay JR
Replies: 10
Views: 3465

Re: Pedal Power 2 and Fuchs Replay JR

If you run the Verbrator without the Ethos in your setup, do you still get the hum? If yes, does it hum setup: guitar > Verbrator > amp (no other effects)? Also, please confirm your Verbrator is powered as described: To power your Verbrator use Pedal Power 2 Plus output 5 or 6, DIP switch set NORMAL...
by Rez
Tue Oct 04, 2011 3:45 pm
Forum: Pedal Power®
Topic: New to this power thing.
Replies: 4
Views: 3464

Re: New to this power thing.

I recommend Pedal Power 2 Plus, setup as described below. Also, you will need a current doubler adapter (part #PPAP) and a 2.1mm reverse polarity cable (part# PPREV). The extra cables can be ordered from our website. Mooger Fooger low pass filter MF-101 To power your MF-101 with Pedal Power 2 Plus, ...
by Rez
Tue Oct 04, 2011 1:04 pm
Forum: Pedal Power®
Topic: Pedal Power 2 and Fuchs Replay JR
Replies: 10
Views: 3465

Re: Pedal Power 2 and Fuchs Replay JR

Are you using Pedal Power 2 or Pedal Power 2 Plus?
by Rez
Tue Oct 04, 2011 12:58 pm
Forum: Pedal Power®
Topic: pedal set up
Replies: 1
Views: 1085

Re: pedal set up

Korg Pitchblack Boss Noise Suppressor Dunlop Crybaby Any of these there pedals may be powered using any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied. Digitech Whammy Your Whammy requires AC power and cannot power from the DC outputs ...
by Rez
Tue Oct 04, 2011 12:54 pm
Forum: Pedal Power®
Topic: PPAV adapter and EHX pedals
Replies: 1
Views: 1364

Re: PPAV adapter and EHX pedals

Because the combined current draw will exceed 250mA (even 300mA), I do not recommend using an output splitter (part# PPAV) to power two of your EHX POG2, Cathedral or Stereo Memory Man with Hazarai from Pedal Power 2 Plus outputs 5 or 6. With 12 pedals, you may wish to consider using a second power ...
by Rez
Tue Oct 04, 2011 12:30 pm
Forum: Pedal Power®
Topic: Daisy Chain Question
Replies: 9
Views: 18391

Re: Daisy Chain Question

Correct. You must use whatever standard polarity cable you would normally use to connect from each inline jack on the output splitter to your effects pedals. We do not offer (as a non-custom built item) an output splitter that connects directly to your effects pedals (ie. with 3 male connectors).
by Rez
Tue Oct 04, 2011 12:05 pm
Forum: Pedal Power®
Topic: Best way to power this setup
Replies: 5
Views: 4603

Re: Best way to power this setup

Powering as you described will likely work well. And as you suggest, if your results are poor, powering the OD9 Pro Plus from the AC courtesy outlet may be necessary. Also, you can use the courtesy outlet as you have described. You can connect a power strip to the courtesy outlet for use with multip...
by Rez
Tue Sep 27, 2011 5:48 pm
Forum: Pedal Power®
Topic: PP2+(which and what pedal)
Replies: 3
Views: 3888

Re: PP2+(which and what pedal)

JHS Charlie Brown
To power your Charlie Brown use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied.

:)
by Rez
Tue Sep 27, 2011 5:43 pm
Forum: Pedal Power®
Topic: Best way to power this setup
Replies: 5
Views: 4603

Re: Best way to power this setup

Maxon AD 9 Pro To power your AD-9 Pro use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied. Maxon OD 9 Pro + To power your OD-9 Pro Plus use Pedal Power 2 Plus output 5 or 6, DIP switch set NORMAL and one of the all black (standard p...
by Rez
Mon Sep 26, 2011 9:37 am
Forum: Pedal Power®
Topic: BK Butler mod 12 Volt VAC
Replies: 5
Views: 2409

Re: BK Butler mod 12 Volt VAC

You indicate the B.K. power configuration has been modified. So, I can't say for sure what cable is required. But, as polarity is not an issue (with AC power), any cable that fits should do the trick. You will likely have one that fits included with the Pedal Power AC.