Voodoo Lab

Hi, long time no see..........this is likely one for JohnClark however if anyone can spot any obvious issues with the wiring let me know. i'm having trouble with my GCX. It's not the GCX that's at fault, of that i'm sure. I suspect it's the way its wired but I just can't get my head around it... May...

Both rows of loops should have nuts on them..... I suspect your unit has been repaired at sometime and whoever did it forgot to replace the nuts when they put it back together.

Speak to John Clark, he'll tell you how to get some replacements

Each loop in totally independent to the next, so to connect each loop to the next you have to use a patch cable from one loop to the next loop. This being the case you can in effect split the GXC, say loops 1 thru 4 can be for analogue pedals like distortions etc, with the output of loop 4 going to ...

It all looks good to me, you will have to order a GCX with a stereo mod on loops 5 thru 8. John Clark would probably be able to help there.

As regards channel switching, yes you will need to account for that on the GCX

Hi, Firstly, to maintain stereo and run the stereo chorus through the PX8 you will have to use 2 audio loops. Also, the chorus will have to go last in the chain on the PX8. I know with the GCX, Voodoo Lab can convert 4 or all 8 loops to stereo loops, however I'm not sure about the PX8. I don't belie...

The midi connections only tell each unit what to change to, they have no bearing on the sound per say..... Therefore it has to be something to do with the setting of the POD, or the audio connections. Is it all connected for stereo, or mono... I'm not sure what it could be, but it might be worth loo...

Thanks for this John..... I'll give it a try this weekend.

i used to have g-major, and it was so much easier to get things done.... The G-Force is much more programmable and flexible, and there lies the issue. You have to program everything into it that is pre-set in the G-major.

I know, I know..... before anyone says anything I know this isn't the TC forum..... But I posted there, and it's falling on deaf ears. So I thought I'd post here too, seeing as there must be someone here that has a TC G-Force and could help me. I have my my expression pedal set up to adjust the glob...

Hi, This is pretty easy, although I'm sure john Clark will chime in with other options. First of all I would not put the POD in the FX loop of the MP1 if you're using it for hi-gains and overdrives. I'm not 100% sure about the POD, but I know hi-gains and overdrives don't sound good in FX loops, alt...

Thanks John, all rewired as you suggested and it's working better than before. For one, the noise has gone, but also it appears to have solved the issue I had with the lower volume from one of the channels... Which is odd. The guitar is more dynamic with the buffer, I've only used it with a guitar c...