Search found 1389 matches

by nyteowl
Mon Jan 31, 2011 10:21 am
Forum: Racks, Switching Systems and MIDI
Topic: Stereo Pan, Parallel amps help!
Replies: 4
Views: 1837

Re: Stereo Pan, Parallel amps help!

There might be a more eloquent way of doing it, but you could start by trying this: http://www.nyteowl.com/0ut/20101131.GCX.jpg You'll have to program you Instant Access buttons so Loops 3 and 4 will activate in tandem with Loop 2. When the three loops are Off, the Mono guitar signal coming into Loo...
by nyteowl
Fri Jan 28, 2011 6:56 am
Forum: Racks, Switching Systems and MIDI
Topic: conecting difficultie gcx
Replies: 3
Views: 1442

Re: conecting difficultie gcx

For this you can use two GCX loops switched simultaneously. What you will do is take the signal that would normally feed the chorus and split it with a Y cable to feed the In of two GCX loops. The Send from either one of these GCX loops would connect to the mono input of the chorus. The stereo outp...
by nyteowl
Tue Jan 25, 2011 12:47 pm
Forum: Racks, Switching Systems and MIDI
Topic: New to GCX and GCP, can you help with my setup?
Replies: 22
Views: 5731

Re: New to GCX and GCP, can you help with my setup?

Is there an alternative to humfree rack tabs, that I could pick up at the local hardware store? HumFrees fold over the screw holes of whatever piece of rack gear you are mounting, thus preventing the rack ear from touching the rail or the unit above or below it, while preventing the head of the rac...
by nyteowl
Tue Jan 25, 2011 8:31 am
Forum: Racks, Switching Systems and MIDI
Topic: Midi Cable?
Replies: 1
Views: 1012

Re: Midi Cable?

Try

http://www.guitar-cable.com

I'm very happy with the cables I've purchased from them.
by nyteowl
Tue Jan 25, 2011 8:26 am
Forum: Racks, Switching Systems and MIDI
Topic: New to GCX and GCP, can you help with my setup?
Replies: 22
Views: 5731

Re: New to GCX and GCP, can you help with my setup?

stacker wrote:Thanks guys!

John, how would I go about isolating the rack rails?
Rubber washers or something like that?
Do a Google search for

HumFrees

They're plastic isolation tabs for rack gear that prevent all metal to metal contact between your rack gear, mounting screws, and rack rails.
by nyteowl
Mon Jan 24, 2011 12:55 pm
Forum: Racks, Switching Systems and MIDI
Topic: New to GCX and GCP, can you help with my setup?
Replies: 22
Views: 5731

Re: New to GCX and GCP, can you help with my setup?

I’d say your problem is that “Send from Loop 1 to Send of FX Loop on Mesa” connection. You’re routing your guitar signal out of Loop 1 and into the FX Send jack of your amp, and by doing so connecting two “send” jacks to one another. Try this: http://www.nyteowl.com/0ut/worksheet.jpg Except for Loop...
by nyteowl
Wed Jan 12, 2011 1:33 pm
Forum: Racks, Switching Systems and MIDI
Topic: I can not access the GCX with GCP. HELP ME JOHN!
Replies: 5
Views: 1934

Re: I can not access the GCX with GCP. HELP ME JOHN!

I am using the Ground Control Pro plugged into the power and connecting the GCX with a 5-pin MIDI cable without connecting the 1 and 3 in the MIDI OUT. This is a little confusing to me. It reads like you are powering the GCP separately and have it connected to the GCX MIDI Out. Perhaps I'm misunder...
by nyteowl
Wed Jan 12, 2011 1:17 pm
Forum: Racks, Switching Systems and MIDI
Topic: Wireless AND Tuner
Replies: 2
Views: 1462

Re: Wireless AND Tuner

As I was setting up my rig with the GCX, I looked at some of the examples on the site, namely: Tuner: http://www.voodoolab.com/gcxdiagrams/02-Pedal_Tuner_FXLoop_Amp_On-Off.pdf and Wireless: http://www.voodoolab.com/gcxdiagrams/03-Wireless_Pedals_3chAmpSw.pdf Now, the question is: is there a way to ...
by nyteowl
Wed Jan 12, 2011 1:05 pm
Forum: Racks, Switching Systems and MIDI
Topic: Another "Help me set this up" Thread... completely blanked!
Replies: 2
Views: 1671

Re: Another "Help me set this up" Thread... completely blank

Fellas, Here's kind of what I'm after: - A patch for muted signal with rack tuner only - each traditional pedal in its own loop (chorus and delay in the amps fx loop, satchurator in front) - channel switching controlled by gcp (think i got this part down) - is there a way to hook my tremonti wah in...
by nyteowl
Thu Dec 30, 2010 12:30 pm
Forum: Racks, Switching Systems and MIDI
Topic: Changing pesets in 4 Preset/Bank deactivates Loops 1 thru 8
Replies: 3
Views: 1594

Re: Changing pesets in 4 Preset/Bank deactivates Loops 1 thr

...but I figured it out a few minutes ago.

In Edit Preset mode, use the Bank Down button to scroll thru the display until it reads GCX-1.
Press No, and the display will read DISABLED.
Press Edit to exit, Yes to Save.
Repeat as needed for each Preset.