Search found 8 matches

by Batman
Tue Aug 26, 2014 9:20 pm
Forum: Racks, Switching Systems and MIDI
Topic: Need help in figuring out my options
Replies: 4
Views: 1953

Re: Need help in figuring out my options

I would start by trying the Wah in loop 1 of the first GCX; run send/return cables from the GCX out to your wah on your pedal board. For the volume pedal, I'd do the same but run the send/return cables between the last GCX loop you are using for effects out to the volume pedal and back to the amps i...
by Batman
Tue Aug 26, 2014 9:03 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP & GCX & GMAJ2 & MESA MARK V problem
Replies: 5
Views: 4030

Re: GCP & GCX & GMAJ2 & MESA MARK V problem

1. Press both Setup buttons on the GCP to enter setup mode then press button 2 for Device Name/Channel. Name your G Major 2 and set it to the MIDI channel you want to use and save. . .I use channel 1 for my G Major. 2. Go to your G Major 2, press MIDI then set the channel to match the GCP and save. ...
by Batman
Wed Aug 06, 2014 3:57 pm
Forum: Racks, Switching Systems and MIDI
Topic: can the ground control be my "favorite switch"
Replies: 6
Views: 3402

Re: can the ground control be my "favorite switch"

I realize this is an old thread but I just found it and have to say thank you to JohnClark for the perfect solution for using my El Cap with the GCX!
by Batman
Wed Dec 12, 2012 8:13 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP, Pedal Switchers, M9 and Timefactor
Replies: 5
Views: 1739

Re: GCP, Pedal Switchers, M9 and Timefactor

Solved! :mrgreen: I had to rearrange the order of the M9 and Timefactor in the MIDI signal path. It seems as though the Timefactor was not receiving messages through the M9 but the reverse seems to work fine. I had to set the Timefactor MIDI OUTPUT to THRU but its all working now. I'm seriously impr...
by Batman
Wed Dec 12, 2012 6:05 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP, Pedal Switchers, M9 and Timefactor
Replies: 5
Views: 1739

Re: GCP, Pedal Switchers, M9 and Timefactor

I did have one bad MIDI cable so that has been replaced and the new one tested. I've got both pedal switchers and the M9 working now but the Timefactor will not respond. I have double checked that the GCP and Timefactor are both set to channel 2 but I cannot get the Timefactor to switch presets via ...
by Batman
Tue Dec 11, 2012 9:18 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP, Pedal Switchers, M9 and Timefactor
Replies: 5
Views: 1739

Re: GCP, Pedal Switchers, M9 and Timefactor

OK, both pedal switchers are working now. I swapped one of the MIDI cables and have the first two units in the signal chain working. I am taking a linear approach to problem solving the rest of the signal chain. Next in line is the M9. I have it set to MIDI channel 1. Are there any settings that I n...
by Batman
Mon Dec 10, 2012 6:33 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP, Pedal Switchers, M9 and Timefactor
Replies: 5
Views: 1739

Re: GCP, Pedal Switchers, M9 and Timefactor

No, the signal chain appears to be dead after the first Pedal Switcher.
by Batman
Mon Dec 10, 2012 4:16 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP, Pedal Switchers, M9 and Timefactor
Replies: 5
Views: 1739

GCP, Pedal Switchers, M9 and Timefactor

Hi All, Brand new member and also new to the world of MIDI. I've been doing a ton of reading both here and elsewhere so I am starting to get my head wrapped around the concepts. I have been working toward a MIDI rig for a couple of months, I have two pedal switchers on my pedalboard and just purchas...