Search found 14 matches

by rodzimguitar68
Thu Mar 30, 2017 10:32 am
Forum: Pedal Power®
Topic: Building new rack - need the right pedal power unit
Replies: 9
Views: 2442

Re: Building new rack - need the right pedal power unit

Heh! I like that! You can power the MIDIbox2 from any output on a Pedal Power 2+ with the corresponding DIP Switch set to Normal using one of the standard all black barrel cables. Good Luck! Thanks for replying. I figured so. The problem is, remember I was out of black cables. I ordered 1 more to u...
by rodzimguitar68
Mon Mar 27, 2017 12:18 pm
Forum: Pedal Power®
Topic: Building new rack - need the right pedal power unit
Replies: 9
Views: 2442

Re: Building new rack - need the right pedal power unit

John Cougar, John Deere, John 3:16.......and John Pedal Power: John, Just one more question. I received my Empress Reverb today. We already discussed the power plan for my entire rig, but I found out along the way that the pedal has a 1/4" control Jack, and therefore requires their Midibox 2 to conv...
by rodzimguitar68
Tue Mar 14, 2017 12:48 pm
Forum: Pedal Power®
Topic: Building new rack - need the right pedal power unit
Replies: 9
Views: 2442

Re: Building new rack - need the right pedal power unit

Nah - to be clear, only the Digital Power is new, based on your advice.

I've had the Pedal Power 2 for 5 years. Plenty of time to lose a few cables. LOL.

Thanks again for all of your help!
by rodzimguitar68
Tue Mar 14, 2017 11:50 am
Forum: Pedal Power®
Topic: Building new rack - need the right pedal power unit
Replies: 9
Views: 2442

Re: Building new rack - need the right pedal power unit

Help me Obi-"Juan" Kenobi you're my only hope Greetings John, I am assembling my rack. I have enough wires to power everything but one pedal that I listed. It's okay because I haven't ordered it yet. It is the Reverb pedal. Anyhoo, I wanted to confirm one thing before proceeding, and that is that I ...
by rodzimguitar68
Wed Feb 22, 2017 5:11 pm
Forum: Pedal Power®
Topic: Building new rack - need the right pedal power unit
Replies: 9
Views: 2442

Re: Building new rack - need the right pedal power unit

Thank you so much! I have an update, and an additional pedal I want to power from my voodoo units if possible. I purchased (1) digital power unit. So now, I have (1) digital and (1) power power 2 I also have added an Electro-Harmonix HOG2 pedal that I failed to mention the first time around, and a M...
by rodzimguitar68
Sun Feb 12, 2017 11:46 am
Forum: Pedal Power®
Topic: Building new rack - need the right pedal power unit
Replies: 9
Views: 2442

Building new rack - need the right pedal power unit

John, I will have the following pedals on rack drawers: (1) Strymon Timeline (1) Boss DD-500 delay (1) Digitech Timebender Delay (1) TC Electronic Alter Ego X4 delay (1) BB Plus dual overdrive (1) Molten Voltage Tempode midi clock generator (1) Line 6 M13 modeler (1) Empress Reverb One note is that ...
by rodzimguitar68
Mon Jul 14, 2014 8:38 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX Audio Switcher and other foot controller
Replies: 5
Views: 2329

Re: GCX Audio Switcher and other foot controller

The Control switcher can be programmed to respond to other midi channels. It can also respond to a different set of CC messages if it comes after the GCX switcher in your midi pathway, and can be left on the same ch 16 with the GCX. Lastly, while the GCX does not respond to midi program changes (and...
by rodzimguitar68
Mon Jan 27, 2014 12:13 pm
Forum: Racks, Switching Systems and MIDI
Topic: 2 x GCX & GCP
Replies: 11
Views: 4147

Re: 2 x GCX & GCP

If you send the above mentioned SysEx message to you rig, the GCX units will auto configure themselves based on their order in the MIDI path. This message will have to be sent whenever the system is powered up. GCX #2 will respond to the following Control Change messages on MIDI Channel 16... 88-95...
by rodzimguitar68
Sat Sep 22, 2012 6:20 am
Forum: Racks, Switching Systems and MIDI
Topic: factory authorized upgrade to convert loops to stereo in GCX
Replies: 1
Views: 1819

factory authorized upgrade to convert loops to stereo in GCX

Can i get information about the cost and the procedure of converting my GCX loops to Stereo, to free up one side of it as mono loops for more mono stompboxes, such as overdrives? My stereo delays are gobbling up my loops! Is this something a competent person can perform, or does the unit have to be ...
by rodzimguitar68
Mon Aug 06, 2012 7:16 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX Audio Switcher
Replies: 10
Views: 2605

Re: GCX Audio Switcher

It's quite possible that, as opposed to the buffered input causing the volume difference, your wireless unit may be the culprit. Does it have a Send Level control for adjusting the output volume? If so, perhaps you could increase the wireless output level to match the direct cable level..? [/quote]...