Search found 11 matches

by Seth008
Mon Sep 23, 2019 7:00 pm
Forum: Racks, Switching Systems and MIDI
Topic: Issues with GCX audio loops
Replies: 3
Views: 736

Re: Issues with GCX audio loops

Followed instructions as you mentioned: All Loops work except for Loop #3. All LED's on the GCX turn on and off when pressing the corresponding switch/button on the GCX. (Including the LED for loop #3) This is an improvement as now channels 4 and 5 seem to be working again however, channel 3 is stil...
by Seth008
Sun Sep 22, 2019 1:17 pm
Forum: Racks, Switching Systems and MIDI
Topic: Issues with GCX audio loops
Replies: 3
Views: 736

Issues with GCX audio loops

Purchased a brand new GCX and Ground Control unit back in March of 2019. At first everything with the GCX unit seemed to be working as intended however, as I have been expanding my setup I have noticed that my GCX unit has several loops which do not function properly when configured as an Audio Loop...
by Seth008
Mon Apr 08, 2019 4:19 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

Re: GCP -> GCX & Midi

Ok so I have this figured out for the HeadRush pedal board. I have to order more cables to hook up the GT-100 in the same manner. The below configuration allows me to bypass the pre-amp altogether when the HeadRush is turned on. Once I turn the HeadRush off, then I am able to use the pre-amp stage n...
by Seth008
Sat Apr 06, 2019 8:32 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

Re: GCP -> GCX & Midi

I was able to get it working as you mentioned. My problem was I had the other loops active while I was testing them out and didn't think that it would cause the signal to break if I had nothing in the Send/Retrun of the empty loops. I went ahead and put patch cables connecting Send/Return together ...
by Seth008
Sat Apr 06, 2019 7:44 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

Re: GCP -> GCX & Midi

I was able to get it working as you mentioned. My problem was I had the other loops active while I was testing them out and didn't think that it would cause the signal to break if I had nothing in the Send/Retrun of the empty loops. I went ahead and put patch cables connecting Send/Return together s...
by Seth008
Fri Apr 05, 2019 4:18 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

Re: GCP -> GCX & Midi

Hi and Thanks! I will give those a shot as soon as I am out of work this evening and post my results.

Thanks Again!
by Seth008
Thu Apr 04, 2019 7:19 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

Re: GCP -> GCX & Midi

Hi JohnClark, Again, thanks for all your help with this...Attached is an image of the configuration which is also written out below. I see what you are getting at so I tried to expand on this and somewhere along the line something is incorrect. I think it is something pretty simple here that is just...
by Seth008
Tue Apr 02, 2019 3:08 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

Re: GCP -> GCX & Midi

Hi JohnClark, Thanks Again as you helped me get started with both AMP's and it is much appreciated. Let me answer your question below: Question: Why am I using the mio10? Answer: Currently, I have more than just 2 MIDI devices (probably close to 8 altogether with more to come in the future). Instead...
by Seth008
Sun Mar 31, 2019 7:22 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP -> GCX & Midi
Replies: 12
Views: 3136

GCP -> GCX & Midi

Currently I have the GCP unit connected to the GCX unit. Is there a way to have the GCP control my MIDI hub (mio10)? I would like to be able to switch between the different channel on my Mio10 hub for different Guitar Effect Processor Pedals (Boss GT-100 and HeadRush Pedalboard). Currently, my setup...
by Seth008
Thu Mar 28, 2019 2:23 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP & GCX to Audiobox to 2 Amps
Replies: 3
Views: 1134

Re: GCP & GCX to Audiobox to 2 Amps

Hi, Thanks for the response! To answer your questions: - Testing the guitar input front panel does work with the configuration you mentioned! - The PreSonus Audiobox USB is used for recording and for utilizing BIAS FX, BIAS AMP, etc from my computer. So in a manner of speaking it will be used as a p...