Search found 10 matches

by Nd272
Mon Jul 15, 2019 3:12 pm
Forum: Racks, Switching Systems and MIDI
Topic: Bugera 1990 channel switching
Replies: 4
Views: 1786

Re: Bugera 1990 channel switching

Thanks John 😀 Very much appreciate all the support These amps are like less than 350€ , seems like a bit of a steal The other amps for Bugera have that weird midi type input but it’s not midi and I know the issues with those foot switches can’t be so easily overcome The 1990 is the only one I seen t...
by Nd272
Mon Jul 15, 2019 3:07 pm
Forum: Racks, Switching Systems and MIDI
Topic: Cc messages with gcx & gcp
Replies: 3
Views: 1490

Re: Cc messages with gcx & gcp

Thanks John Certainly helps clear things up ! I also have just taken delivery of an intellifex too, good to know I can use either option in terms of leaving it in the signal path or assigning on/off state in the gcx loop I know the gmajor2 gets some stick online for some tone suck but I am assuming ...
by Nd272
Sat Jul 13, 2019 10:25 am
Forum: Racks, Switching Systems and MIDI
Topic: Cc messages with gcx & gcp
Replies: 3
Views: 1490

Re: Cc messages with gcx & gcp

Sorry if I wasn’t clear on the initial post Say I have all these units connected into the gcx and using the gcp, for argument sake say preset 1 I want jmp1 on I know how to do that, and say I want gm2 delay block on/off I know that by setting the gcp to 4 preset per bank the 8 instant access buttons...
by Nd272
Fri Jul 12, 2019 4:45 am
Forum: Racks, Switching Systems and MIDI
Topic: Cc messages with gcx & gcp
Replies: 3
Views: 1490

Cc messages with gcx & gcp

Hi guys I apologies in advance if this is a stupid question , but I’ve read both manuals and can’t seem to find an answer I have the gcp and just waiting arrival on gcx. I have jmp preamp GSP1101 preamp gmajor2 etc Question is say I connect all these up between the diagrams via the gcx, I have the g...
by Nd272
Thu Jul 11, 2019 3:02 pm
Forum: Racks, Switching Systems and MIDI
Topic: Bugera 1990 channel switching
Replies: 4
Views: 1786

Re: Bugera 1990 channel switching

No problem at all to control this switching setup! A GCX or a Control Switcher will need an Insert Point Cable to connect between the switcher and the amp. An Insert Point Cable has a TRS end that breaks out to two TS ends. I hope that helps! Thanks a mil for quick response Would that be something ...
by Nd272
Thu Jul 11, 2019 1:52 pm
Forum: Racks, Switching Systems and MIDI
Topic: Bugera 1990 channel switching
Replies: 4
Views: 1786

Bugera 1990 channel switching

Hi I know the topic of Bugera Amps and the way they are wired has been brought up before , I know they don’t usually follow the same process as normal amps The 1990 model however seems to have a normal 1/4” input for channel switching utilizing the tip and ring (tip for channel switching and ring to...
by Nd272
Mon Jul 08, 2019 6:14 am
Forum: Racks, Switching Systems and MIDI
Topic: Jmp1 GSP1101 advice
Replies: 4
Views: 1954

Re: Jmp1 GSP1101 advice

Thank you so much for the comprehensive outline there of how to rig it all up much appreciated The setup I use at the moment is that in page 12 (setup no.7on this link )https://3e7777c294b9bcaa5486-bc95634e606bab3d0a267a5a7901c44d.ssl.cf2.rackcdn.com/product_documents/documents/2_1515017741/GSP1101_...
by Nd272
Sat Jul 06, 2019 7:43 pm
Forum: Racks, Switching Systems and MIDI
Topic: Jmp1 GSP1101 advice
Replies: 4
Views: 1954

Re: Jmp1 GSP1101 advice

That’s perfect thanks for the reply 😀 Only reason wanted opinion was because I can utilize the gsp unit being able to integrate with jmp so I could use it for patches with gsp, downside to that is having to connect it via 4 cable method As you say, I can mess around with it and see what way works be...
by Nd272
Fri Jul 05, 2019 6:38 pm
Forum: Racks, Switching Systems and MIDI
Topic: Jmp1 GSP1101 advice
Replies: 4
Views: 1954

Jmp1 GSP1101 advice

Hi there I’ve had a look on the forum for the correct answer to this and can’t seem to find it I have a gcx and gcp and I want to set it up in a way that I can utilize the Digitech GSP1101 and jmp1 in the gsp’s loop which gives you a choice whether you want to use an internal or external preamp. Thi...
by Nd272
Sun Dec 02, 2018 1:23 pm
Forum: Racks, Switching Systems and MIDI
Topic: Ground Control Pro instant access
Replies: 1
Views: 1467

Ground Control Pro instant access

Hi, I am ordering a GC pro so as to start assembling a rack. I have researched extensively the manual for gc pro, just want to clarify something : I have a jmp1 preamp and tc g major 2, and wish to use the gc pro in the 4 button per preset mode, with the other 8 buttons being instant access. Questio...